Installing an expansion card Step 1. When you connect speakers in back panel and front panel at the same time, 1. If no jumper cap is placed on the pins, the jumper is “OPEN”. The AGP slot is used to install a graphics card. Installation Pre-iristallation Precautions Take note of the following precautions before you install motherboard components or change any motherboard settings. Fasten the card to the chassis with screws.

Uploader: Doukasa
Date Added: 15 August 2013
File Size: 64.87 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 9730
Price: Free* [*Free Regsitration Required]

The data in CMOS includes system setup information such as system password, date, time, and system setup parameters. Remove the bracket facing the slot that you intend to use. Before installing the expansion card, read the documentation of the expansion card and make necessary hardware settings for the card.

ASRock K7VM2 – motherboard – micro ATX – Socket A – KM266

Hold components by the edges and do not touch the ICs 4. It is a menu-driven program, which allows you to scroll through its various sub-menus and to select among the predetermined choices. Supports 2 floppy disk k77vm2 Audio: However, it requires your front panel to support the function. Please follow the figures above to set the CPU front side bus frequency. If no jumper cap is placed on the pins, the jumper is “OPEN”.

If the 4 USB 2. Unlock a DIMM slot by pressing the retaining clips outward. Please remember to remove the paper clip or the jumper cap after clearing the CMOS.


It’s a community-based project which helps to repair anything. Installing an expansion card Step 1. Please check if the CPU fan on the motherboard functions properly before you resume the system. More detailed information of the motherboard can be found in the user manual enclosed in the product CD-ROM. If both jumper caps on JL1 and JR1 are removed see fig. To improve heat dissipation, remember to spray thermal grease between the CPU and the heatsink when you install the PC system.

DO NOT place jumper caps over these connectors. Match the red marking on the floppy ribbon cable with Pin1. Specifications and information contained in auido guide are furnished for informational use only and subject to change without notice, and should not be constructed as a commitment by ASRock. Install CPU fan and heatsink.

ASRock K7VM2, Socket A, AMD Motherboard

Power Management for USB 2. Also remember to use a grounded wrist strap or touch a safety grounded object before you handle components. Align the card connector with the slot and press firmly until the card is completely seated on the slot. It delivers excellent performance with robust design conforming to ASRock’s commitment to quality and endurance. This Quick Installation Guide contains introduction of the motherboard and step-bystep installation guide for new DIY system builders.

ASRock > K7VM2 R

Micro ATX form factor 9. With respect to the contents of this guide, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose. No part of this installation guide may be reproduced, transcribed, ,7vm2, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc.


To avoid damaging the motherboard components due to static electricity, NEVER place your motherboard directly on the carpet or the like. Please turn off the computer and unplug the power cord, then you may either short the solder points on CLRCMOS1 by using metal material, e.

In no event shall ASRock, its directors, officers, employees, or agents be liable for any indirect, special, incidental, or consequential damages including damages for loss of profits, loss of business, loss of data, interruption of business and the likeeven if ASRock has been advised of the possibility of such damages arising from any defect or error in the guide or product. The Support CD that came with the motherboard contains necessary drivers and useful utilities that will enhance motherboard features.

If the jumpers JL1 and Asrocck are short see fig.

Keep the screws for later use. While CPU overheat is detected, the system will automatically shutdown.